Water Storage Tanks, Inc.

NFPA 22 Compliance and how to limit liability

Miles Hartman — Thu, 16 Apr 2026 15:10:47 +0000

Author: Miles Hartman

Share This Article:

Understanding how to properly design, review, and approve fire protection water storage systems goes far beyond checking boxes in a standard. In this presentation by Kai Langendoen, the focus is on not just meeting the baseline requirements of NFPA 22, but truly understanding the intent behind the code. Particularly when it comes to equivalency and liability related to fire protection tanks. As new technologies and alternative tank designs continue to enter the market, the responsibility placed on engineers, designers, and code officials has only increased.

This discussion breaks down what compliance actually means in practice, highlighting common areas of confusion such as equivalency, structural versus fire design responsibilities, and the real-world consequences of improper review or approval. It also emphasizes a critical point often overlooked: ignorance of the standard does not remove liability. Whether you are stamping plans, reviewing submittals, or inspecting installations, the decisions made at each stage carry significant professional and legal weight.

The video below is intended to provide clarity and practical guidance, helping you evaluate systems more confidently, identify potential risks, and better understand what constitutes a compliant and reliable fire protection water storage solution.

If you have questions about NFPA 22 compliance, equivalency, or how to properly evaluate a specific project, feel free to reach out. You can email us at info@waterstoragetanksinc.com or give us a call at (512) 301-1817.

If you’re looking for help with your next project and need a vendor who truly understands the in’s and out’s of NFPA 22, you can fill out the form below and a member of our team will be in touch.

Connect With Us on Social Media

Is It Illegal to Collect Rainwater? A Guide to the Legality of Rainwater Collection in the U.S.

Josh Cizek — Fri, 20 Sep 2024 22:07:27 +0000

Authors: Josh Cizek, Marketing Specialist; Brittany Driscoll, Senior Sales Representative

Share this article

As water conservation becomes more pressing and popular, individuals and businesses increasingly embrace self-sustainable practices like rainwater harvesting. This eco-friendly method of collecting and storing rainwater is not only beneficial for the environment but also for meeting various water needs, such as irrigation, livestock, and even household consumption. However, many people ask, “Is rainwater harvesting illegal?” The answer varies by state, city, and even neighborhood. In this article, we’ll explore the legality of rainwater harvesting, highlighting where it’s restricted and explaining why those restrictions exist. We’ll also guide you through state regulations.

Table of Contents

What is Rainwater Harvesting?

Rainwater harvesting involves collecting and storing rainwater, typically from rooftops, into tanks or reservoirs for future use. This stored water can be utilized for various purposes, including watering plants, irrigation, watering livestock, keeping pond levels stable, flushing toilets, and even drinking water if appropriately treated. Many systems collect water from rooftops, directing it into a tank or cistern next to a home or other large structures where it’s stored for later use.

The question of legality arises because, while this practice has obvious benefits, there are regulations in some states that either restrict or regulate rainwater collection. These laws are often based on water rights and concerns over how rainwater collection might impact the local watershed.

Federal vs. State Regulations on Rainwater Harvesting

The federal government does not regulate rainwater harvesting. This leaves the responsibility of managing rainwater collection to state and local governments, which results in a patchwork of laws across the country. Some states actively encourage rainwater harvesting, while others impose restrictions. In some areas, even HOAs or neighborhoods might limit the installation of rainwater collection systems.

States Where Rainwater Harvesting Is Encouraged

Several states actively support rainwater collection, providing tax incentives, rebates, or even statewide regulations promoting the practice. We explore the rules for just a few states, but acknowledge that many other states encourage the practice:

Texas Rainwater Collection Rules

Texas has become a leader in rainwater harvesting in a state with frequent water shortages. The Texas Water Development Board encourages municipalities to adopt ordinances supporting the practice. At the state level, legislation has been passed to make the purchase of rainwater harvesting materials sales-tax free. The state also prohibits the banning of rainwater harvesting by homeowner associations (HOAs) and requires designers of public buildings to consider rainwater harvesting in their plans. Additionally, many Texas cities offer rebates for installing rainwater harvesting systems. However, HOAs do have the ability to regulate rainwater harvesting systems within their neighborhood and set restrictions, so it’s important to check local rules on your city’s website or contact your HOA.

Arizona Rainwater Collection Rules

Arizona offers tax incentives for homeowners and businesses that install rainwater harvesting systems. The state promotes sustaining water resources, combating potential drought, and improving the local watershed by collecting rainwater from impervious surfaces.

California Rainwater Collection Rules

California has a history of consistent droughts and actively encourages rainwater harvesting. The Rainwater Capture Act of 2012 allows residents to install rainwater systems without permits, so long as the water is used for non-potable purposes.

Oregon Rainwater Collection Rules

Oregon dictates that residents can collect rainwater from impervious surfaces such as rooftops without needing a water rights permit. The state sees rainwater harvesting as an essential tool for sustainable water use.

Virginia Rainwater Collection Rules

Virginia’s 2001 Senate Bill 1416 grants an income tax credit to homeowners who install a rainwater collection system. Additionally, the Virginia Code 31.1-248.2 states that the Department of the State and the Department of Environmental Quality are to promote rainwater collection for water conservation, reducing strain on the local water supply, and decreasing freshwater consumption and waste. This state makes it clear that it strongly advocates rainwater harvesting.

States With Restrictions or Limitations on Rainwater Harvesting

While rainwater harvesting is encouraged in many places, some states restrict or regulate the practice based on concerns about water rights and the potential impact on local ecosystems:

Colorado Rainwater Restrictions

Known for its strict water laws, Colorado historically banned most rainwater harvesting. However, in 2016, legislation was passed allowing residents to collect up to 110 annual gallons of rainwater from their roofs for use on their property. Colorado’s complex water rights system ensures that rainwater is allocated to downstream users, which is why strict regulations remain.

Utah Rainwater Restrictions

Residents can harvest rainwater in Utah, but they must register their rainwater collection system with the state if it exceeds a specific size. Utah’s rainwater harvesting laws are designed to ensure that the water is adequately managed without affecting water holder rights.

Nevada Rainwater Restrictions

Rainwater collection in Nevada is primarily limited to those who hold water rights. The state views rainwater as part of the greater watershed, meaning that restrictions are in place to protect the broader water system as set forth by Assembly Bill AB138.

Other States That Have Limitations or Restrictions on Rainwater Collection

Arkansas, Georgia, Idaho, Illinois, and Ohio.

Why Do Some States Restrict Rainwater Harvesting?

The primary reason for restricting rainwater harvesting stems from water rights laws. In states like Colorado, where water is a precious commodity, these laws ensure that every drop of water is allocated to specific uses, including surface water that eventually flows into rivers, lakes, or reservoirs. Rainwater collection in these states can divert water from its intended destination, affecting downstream users and local ecosystems.

Similarly, states like Utah and Nevada restrict rainwater collection to protect the delicate balance of their water systems, ensuring that water remains available to those with legal rights to its use.

What You Need to Know Before Starting Your Rainwater Harvesting Project

If you’re considering rainwater harvesting, there are a few steps to take before starting your project:

Research State and Local Laws: Each state has different rainwater harvesting regulations. Even if it’s allowed in your state, check your city’s or HOA’s rules to ensure compliance.
Register Your System if Necessary: In some states, like Utah, you may need to register your rainwater collection system with state authorities.
Consult ARCSA Guidelines: Following the American Rainwater Catchment Systems Association’s (ARCSA) guidelines for rainwater system engineering and installation ensures that your system is safe, compliant, and efficient.
Work With Professionals: Installing a rainwater system can be complex, especially if you plan to use the water for drinking. Consulting experts in the field can help you set up a compliant and sustainable system.

Photograph of a CorGal® rainwater harvesting tank connected to the roof of a residential home by an aqueduct. Source: intellectual property of Water Storage Tanks, Inc.

Water Storage Tanks, Inc. and ARCSA: Leaders in Rainwater Harvesting

At Water Storage Tanks, Inc. and Specified Water Systems, LLC, we’ve long been champions of rainwater harvesting and are deeply involved in the industry. Our Vice President, Christy Langendoen, also serves as ARCSA’s Vice President, ensuring that Water Storage Tanks, Inc. remains at the forefront of rainwater harvesting innovation and best practices. Our partnership with ARCSA helps us stay on top of evolving rainwater harvesting laws and regulations, allowing us to guide homeowners and businesses with the most accurate, up-to-date information.

Our involvement with ARCSA also reinforces our commitment to sustainability and water conservation. We take pride in adhering to ARCSA’s high rainwater system design, installation, and safety standards, making us a trusted choice for those looking to implement rainwater harvesting systems on their next project.

Rainwater Harvesting Tanks from Water Storage Tanks, Inc.

If you’re interested in starting your rainwater collection journey, Water Storage Tanks, Inc. and our network of dealers offer a variety of solutions tailored to meet your needs. Whether you’re a homeowner looking to reduce water consumption or a business aiming to integrate sustainable practices, our rainwater harvesting systems are customizable, durable, and efficient.

Custom Rainwater Harvesting Systems: We offer a range of customizable tanks that can be built to fit your specific project requirements. Whether for irrigation, livestock, or potable use, our tanks are designed to withstand the elements and provide long-term water storage solutions.
Expert Guidance on Rainwater Collection Regulations: As rainwater harvesting laws vary by state and locality, our team of experts helps ensure that your system complies with all relevant regulations, saving you time and hassle.
Sustainable Rainwater System Design: Our tanks are built with sustainability in mind, ensuring that your rainwater harvesting efforts are as eco-friendly as possible. With Christy Langendoen, ARCSA’s Vice President, we ensure all systems meet the latest industry standards.

Conclusion: Is Rainwater Harvesting Illegal?

In most states, rainwater harvesting is perfectly legal; in some, it’s even encouraged. However, some states have restrictions, primarily due to water rights and concerns about diverting water from natural systems. Understanding your state, city, and HOA laws is essential before installing a rainwater collection system.

At Water Storage Tanks, Inc., we’re proud to be at the forefront of rainwater harvesting, offering industry-leading solutions and guidance on best practices. Our involvement in ARCSA, commitment to sustainability, and emphasis on top-quality products make us the top choice for those looking to start a rainwater harvesting project. Visit our rainwater harvesting page to learn more, or contact us for a free consultation or quote.

Get a FREE Consultation on Your Next Water Storage Project

Connect With Us on Social Media

Check Out Our Latest Posts

NFPA 22 Compliance and how to limit liability
by Miles Hartman
April 16, 2026
Is It Illegal to Collect Rainwater? A Guide to the Legality of Rainwater Collection in the U.S.
by Josh Cizek
September 20, 2024
Requirements for NFPA 22 Compliance: Corrugated Bolted Steel Fire Protection Tanks
by Josh Cizek
September 5, 2024
Exploring Water’s Vital Role Beyond Drinking
by Josh Cizek
August 13, 2024

Explore Post Categories

Requirements for NFPA 22 Compliance: Corrugated Bolted Steel Fire Protection Tanks

Josh Cizek — Thu, 05 Sep 2024 21:51:20 +0000

Author: Josh Cizek, Marketing Specialist

Share this article

Fire protection is a critical component of building and life safety, and having reliable water storage fire protection tanks is essential for ensuring readiness in a fire emergency. The National Fire Protection Association (NFPA) has established NFPA 22 standards to guide the design, construction, installation, and maintenance of water storage tanks used for fire protection. Water Storage Tanks, Inc. is committed to delivering the highest quality products, strictly adhering to NFPA 22 standards. We offer corrugated bolted steel fire protection tanks that meet and exceed these rigorous requirements. This article aims to educate you on NFPA 22 compliance and equivalency, specifically for NFPA 22 equivalency for corrugated bolted steel fire tanks, and demonstrate why our fire tanks are considered the premium choice for fire protection in our industry.

Please refer to the References section for information about the editions of the standards and codes referenced in this article.

Table of Contents

The Significance of NFPA 22

NFPA 22 is the industry standard that defines the requirements for the design, construction, installation, and maintenance of water storage tanks used for fire protection. The primary objective of this standard is to ensure that these fire tanks are structurally sound and equipped with the necessary fire protection appurtenances. Section 1.4 allows for an equivalency process for products not explicitly covered by the standard, and Section 1.7 allows for new technologies.

By definition, an NFPA 22 “Compliant” water tank is one that is explicitly detailed with its own dedicated chapter in the standard. All other tanks must be listed as NFPA 22 “Equivalent.”

Understanding NFPA 22 Compliant Fire Tanks

What is NFPA 22 Equivalency?

Section 1.4 of NFPA 22 states that technical documentation shall be submitted to the Authority Having Jurisdiction (AHJ) to demonstrate equivalency. This process involves proving that the proposed fire tank design meets or exceeds the performance requirements outlined in NFPA 22. In the case of corrugated bolted steel fire tanks, this means providing detailed documentation and calculations to confirm structural integrity and fire protection design.

As it pertains explicitly to corrugated bolted steel fire tanks, the concept of equivalency has been a topic of significant discussion within the NFPA 22 Technical Committee. To date, there has not been a summarized guideline that defines the metrics a corrugated bolted steel fire tank must meet to be equivalent in quality, strength, and effectiveness. Because of this, fire protection tank manufacturers and installers struggle to provide the necessary documentation to prove equivalency. Meanwhile, local governmental and non-governmental entities responsible for enforcing building and fire codes, or AHJs, such as Fire Marshals and engineers, find it challenging to determine what constitutes NFPA 22 equivalency and may overlook critical design elements.

https://youtu.be/RMr98pePcc8

YouTube video of Kai Langendoen, President of Water Storage Tanks, Inc., presenting on NFPA 22 compliance & equivalency at the 2024 NFPA Conference & Expo in Orlando, FL. June 19, 2024.

Critical Components of NFPA 22 Equivalency

To demonstrate NFPA 22 equivalency, a fire protection tank manufacturer must provide critical pieces of information, including:

1. Proof of Structural Compliance

A structural or civil engineer must perform structural calculations and consider live, dead, wind, snow, and seismic loads outlined in NFPA 22 Chapter 4.12. These loads must be further validated in accordance with ASCE 7: Minimum Design Loads and Associated Criteria for Buildings and Other Structures, with the more stringent loads taking precedence in the tank design.
To withstand extreme weather conditions, the fire tank must be engineered to Risk Category IV under the International Building Code (IBC) Chapter 1604.5.
Structural reviews ensure the fire tank’s safety during installation, inspection, testing, maintenance, and operation, even during natural emergencies. These are to be included in the submission package.

2. Proof of Compliance with Fire Protection Appurtenances

The fire tank must accommodate the appurtenances defined in NFPA 22 and meet usable water volume requirements.
The calculation of usable gallons, in accordance with NFPA 13, NFPA 1142, or fire code, along with the types of appurtenances used, falls within the design responsibility of a fire protection engineer or a professional specializing in fire protection design and is included in the submission package.

NFPA 22 Fire Tank Structural Requirements

Load Requirements for NFPA 22 Fire Tanks

To recap, the fire protection tank must conform to NFPA 22 and ASCE 7 standards for calculating snow, wind, and seismic loads. For reference, AWWA D103 provides formulas for allowable hoop shell tension. The fire tank must also be engineered to Risk Category IV under IBC Chapter 1604.5 to maintain water pressure for fire suppression.

Beware of other fire tank suppliers falsely claiming to sell NFPA 22 compliant fire tanks. Upon review of their load calculations, their fire tanks are often engineered only to meet Risk Category II. The AHJ must verify that the fire tank is engineered to Risk Category IV to withstand increased loads and prevent failure during extreme climatic events, reducing hazard risk to the community.

Roof Design Requirements for Fire Protection Tanks

According to NFPA 22 Chapter 4.12.2.4, roofs with slopes less than 30 degrees must support a uniform weight of 25 lb/ft² (122.06 kg/m²) on the horizontal projection, regardless of snow or ice loads. This requirement is essential for flat roof water tanks and ensures a safe, functional, and serviceable roof for personnel access. One might also find that other fire tank suppliers claim to sell NFPA 22 compliant fire tanks but fail to comply with this simple requirement. This is typically the case with suppliers who use a flat or dome roof for their fire tank. Therefore, the AHJ and engineer must confirm that the fire tank meets this requirement.

Two illustrations depict trusses for fire tank roofs sloped less than 30 degrees. The left illustration shows a large gap between trusses and no cross-sectional trusses, suggesting the roof cannot support a 25 lb/ft² live load. The designer’s notes in the right illustration present trusses designed to support a “20 PSF” live load. Neither design meets NFPA 22 compliance as they fail to support the required live load. Fair use of these images is implied. Images may be subject to copyright.

This illustration and photograph show trusses for fire tank roofs sloped less than 30 degrees. Structural engineers calculated these specific designs, which Fire Marshals approved because they have demonstrated NFPA 22 equivalence by supporting a 25 lb/ft² live load. Source: intellectual property of Water Storage Tanks, Inc.

Geographical Considerations for Fire Protection Tanks

Different geographical areas produce varying wind, snow, and seismic load requirements. Adjusting structural designs based on site-specific climatic loads is crucial for fire tank design. Unfortunately, some fire tank suppliers use generic designs for all locations, increasing the risk of failure. The absence of the site address or coordinates on the engineering cover sheet often indicates improper design.

AHJs or engineers can use tools like the ASCE Hazard Tool website to verify the correct load requirements for a specific location. Considering regional factors, this resource uses ASCE 7 standards to determine the precise design loads needed for a given project address.

The following chart, based on the ASCE Hazard Tool, shows the Risk Category IV design loads for three different parts of the United States:

City	Wind (Vmph)	Snow (lb/ft²)	Seismic (SDC)
New York, NY, USA	130	62	C
Houston, TX, USA	145	11	A
Portland, OR, USA	107	69	D

The table lists three cities and their respective wind, snow, and seismic loads. The calculations are sourced from the ASCE Hazard Tool.

Wind Load Requirements for Fire Protection Tanks

For high-wind areas, the roof and sidewall of the fire tank must be rigid and durable enough to withstand horizontal and updraft wind forces. Chapter 4.12.3.1 of NFPA 22 requires these loads to withstand a minimum of 30 lb/ft² (146.47 kg/m²) on vertical surfaces, 18 lb/ft² (87.88 kg/m²) on cylindrical surfaces, and 15 lb/ft² (73.24 kg/m²) on conical and double-curved surfaces. ASCE 7 calculates wind load factors such as wind directionality, topography, velocity pressure, gust effects, and internal and external pressure. According to Risk Category IV, this load’s importance factor is 1.15.

Diagram illustrating the wind and seismic load forces on a water storage tank, displayed on the horizontal and vertical projections. Source: Ivo Casagrande Júnior

Seismic Load Requirements for Fire Protection Tanks

To prevent toppling or lifting, fire tanks must be securely affixed in high seismic areas. Guidelines in ACI 318 govern this factor. Tank sidewalls must withstand seismic compressive forces, possibly requiring vertical stiffeners. Seismic anchors or braces should be installed, with anchor rods stretching eight times their diameter. According to Risk Category IV, this load’s important factor is 1.50.

While NFPA 22 does not specify seismic loads, it mandates compliance with local building codes. Specific design criteria should be detailed in the relevant chapter or local codes, whichever is stricter, to ensure NFPA 22 compliance.

Concrete Foundations for Fire Protection Tanks

NFPA 22 Chapter 12.2 requires tank foundations to be set on a concrete slab, concrete ring wall with a sand cushion, compacted crushed stone, granular base, or self-anchoring system supported by granular berms. Additionally, NFPA 22 Chapter 12.6 mandates soil testing by a lab to ensure foundational support.

Given all these options, one might wonder what the best and most practical foundation for a fire tank is. In our professional opinion, a concrete-rebar slab foundation offers the highest structural integrity and safety, which is why we use this method for all our fire protection tanks. Some fire tank suppliers use a sand or gravel base, which is only permitted if the fire tank’s side walls are anchored to a concrete ring wall or if a steel floor is included for self-anchoring. However, using a sand or gravel base as a cushion or foundation introduces the risk of foundational shifts, compromising the fire tank’s structural integrity and potentially causing structural failure or punctures to the liner. This risk is particularly significant in areas with soft soil or prone to flooding. Therefore, it is recommended that a concrete-rebar slab be installed before tank installation in accordance with relevant codes.

Corrugated bolted steel fire protection tanks must comply with the equivalence and intent of the relevant sections to meet NFPA 22 standards.

Full Water Load Capacity for Fire Protection Tanks

The fire tank must be designed to withstand the live load of water when it is full. This includes both the weight of water (vertical projection) and the hoop stresses on the walls (horizontal projection). Freeboard calculations are necessary to demonstrate that the fire tank can withstand the sloshing effect of water. If these load capacities are not met, the fire tank may be at risk of failure, thereby setting the liner and tank up to burst out through the bottom.

Fire Protection Design on NFPA 22 Fire Tanks

NFPA 22 specifies the essential appurtenances for compliant fire protection tanks, and a licensed professional engineer or fire protection designer typically handles the design.

Submission requirements for corrugated bolted steel fire tanks are similar to other tank styles. To prove equivalency, the designer must show that the fire tank supports essential appurtenances and meets the required water capacity as dictated in NFPA 22 Chapter 4.1. This includes the net capacity between the inlet of the overflow and the discharge outlet, or for suction tanks, the level of the vortex plate.

What Must Be Included in a NFPA 22 Fire Protection Tank Submittal

NFPA 22 Chapter 4.6.2.2 details what must be included in a proper submittal:

Size and arrangement of all pipes
Size, location, and type of all valves, tank heater, and other accessories
Steam pressures available at the heater
Arrangement of, and full information regarding, the steam supply and return system together with pipe sizes
Details of construction of the frostproof casing
Where heating is required, heat loss calculations
Structural drawings and calculations
Seismic bracing details and calculations
Operational settings and sequence of operation
Monitoring equipment and connections
Underground details, including foundations, compaction, and backfill details and calculations
Buoyancy calculations for buried tanks (not relevant for above-ground corrugated bolted steel fire protection tanks)

The AHJ will then review the submittal to ensure compliance, as with any other fire tank style.

Essential NFPA 22 Fire Protection Tank Accessories

An NFPA 22 compliant fire tank will include the following fire protection accessories:

1. Anti-Vortex Fitting

These prevent air from entering the pump suction line and must follow NFPA 22 Chapter 14.2.13.2 guidelines. They are attached to the discharge outlet pipe.
The steel plate must be at least twice the diameter of the outlet pipe and at be least 6 inches (15.24 centimeters) above the floor.
If mounted to the wall, the elbow must have a long radius.

Figure portraying photographs and a diagram of anti-vortex assemblies and their compliance with NFPA 22. The listed non-compliant examples do not comply with NFPA 22 due to improper orientation or use of non-compliant parts such as short-radius elbow joints. Source of photograph of top left anti-vortex fitting: intellectual property of Water Storage Tanks, Inc. Source of the top left diagram: 2023 Edition of NFPA 22 Standard for Water Tanks for Private Fire Protection. Source of photographs of bottom two short radius elbow anti-vortex fittings: unknown (may be subject to copyright).

2. Roof Vents

Prevents internal vacuum suction pressures that can damage the fire tank’s structure as per NFPA 22 Chapter 4.15.
The vent must be located above the maximum water level and at least one-half the diameter of the discharge or fill pipe.
A corrosion-resistant screen with 3/8-inch (0.95 centimeters) holes will be included.
If only a screen is used for the vent, it must be 1.5 times the diameter of the discharge or fill pipe.

3. Water Level Gauges

The water level gauge aims to accurately display the current water level.
Some AHJs may require low level alarms installed in conjunction with or in lieu of a traditional water level gauge.

4. Heating Systems

These keep water temperatures above freezing in cold climates following NFPA 22 Chapter 16.
This may not be required depending on the geographic location of the fire tank. If the geography experiences freezing temperatures, a heating system must keep the water temperature at or above 42^o Fahrenheit (5.6^o Celsius).
A low water temperature alarm set at 40^o Fahrenheit (4.4^o Celsius) is to be included.

5. Exterior Ladder with Fall Arrest (Optional)

An exterior ladder allows one to safely climb the fire tank’s roof for maintenance or inspection.
Per OSHA 1910.28 guidelines, a fixed ladder must have a fall arrest when the ladder is over 24 feet (7.32 meters) tall.
Safety cages are no longer recognized as OSHA-compliant, but they may still be practical for lock-out or tamper prevention.
The ladder must support a vertical load of 350 pounds (158.76 kilograms), as noted in NFPA 22 Chapter 4.12.6.1.

6. Access Hatch

An access hatch must be affixed to the tank’s roof to allow personnel to enter the tank for maintenance and inspection.
According to NFPA 22 Chapter 4.14.1.1, OSHA-compliant standard railing must be installed around the roof’s access hatch and other accessories that require tank access.

Diagram of an NFPA 22 compliant CorGal® fire tank with standard NFPA 22 fire protection accessories. Source: intellectual property of Water Storage Tanks, Inc.

Flexible Membrane Liners in NFPA 22 Fire Tanks

While NFPA 22 plays a central role in ensuring the safety and reliability of fire protection tanks, the quality of flexible membrane liners paired with the fire tank system must also be considered.

Flexible membrane liners are practical for sealing water in fire protection tanks. They are easy to install and repair and extend the fire tank’s lifespan while being cost-effective. The liner must support the water’s pressure and weight without damage.

Currently, there are no specific standards for flexible membrane liners in steel, above-ground fire protection tanks, but three resources can provide some guidance:

AWWA D102: A steel water storage tank used for potable water storage and utilizing a liner must have a minimum dry film thickness of 25 mils (depending on the coating system employed).
AWWA D130: A flexible membrane liner utilized in a water reservoir must have a minimum thickness of 30 mils.
FM 4020: Fire protection tanks utilizing unreinforced liners should be at least 30 mils thick, whereas scrim-reinforced liners should be at least 24 mils thick.

With varying numbers, it can be challenging to determine what is considered an NFPA 22 equivalent liner for corrugated bolted steel fire tanks. However, it is crucial to understand that water reservoirs are subject to environmental hazards that are not present in enclosed water storage tanks. Hence, AWWA D130’s requirement of a thickness of 30 mils is arguably excessive for a fire protection tank since the liner will be utilized in a closed space sheltered from the environment.

It is important to remember that FM Approvals is a sub-entity of FM Global, a for-profit mutual insurance company that sets its own standards for fire tanks separate from NFPA 22. This company requires tank manufacturers to pay for approval of a fire tank design and installation. Because of this, a fire tank can meet or exceed FM 4020 fire tank standards without being considered “FM Approved.” This contrasts with non-profit organizations like NFPA and AWWA, which establish international standards that are publicly reviewed, assessed, and adopted by governing laws and codes. For this reason, FM Approvals’ liner thickness requirements are subject to debate and professional opinion.

It can be argued that AWWA D102’s liner thickness requirement of 25 mils is equivalent to NFPA 22. While the two standards discuss water storage tanks with differing applications (potable water storage versus fire protection water storage), the purpose of the liner storing water remains the same.

Therefore, we suggest a minimum reinforced flexible membrane liner thickness of 25 mils for NFPA 22 equivalency in corrugated bolted steel fire tanks. We also recommend installing a geotextile pre-liner for additional cushioning protection. This pre-liner prevents potential tears in the liner caused by friction or wear from the steel walls and bolts. It additionally allows condensation to wick between the liner and steel walls and, through gravity, exits the tank, thereby mitigating corrosion.

In our professional opinion, the fire protection designer and the AHJ are responsible for determining NFPA 22 equivalence for liners, as the liner system is not essential to structural load calculations. These opinions are based on extensive experience in manufacturing and 20+ years installing fire protection tanks. Water Storage Tanks, Inc. was the first company to introduce this style of fire tank to the United States. As the corrugated bolted steel water storage tank industry’s pioneer, we have effectively demonstrated that our fire tanks comply with all structural and fire protection standards and codes where relevant. Our fire tanks have proven to stand against the test of time and face environmental adversity through decades of use.

Diagram of an NFPA 22 compliant CorGal® fire tank with standard NFPA 22 fire protection accessories. Source: intellectual property of Water Storage Tanks, Inc.

Submitting Your NFPA 22 Fire Tank Designs

To demonstrate NFPA 22 equivalency, a comprehensive submission package for the fire tank must be prepared, including:

1. Structural Design Calculation Document

Site-specific structural reviews that guarantee the fire tank’s safety during installation, inspection, testing, maintenance, and operation, including during natural emergencies.
Detailed structural calculations demonstrating the fire tank’s ability to withstand various loads, including site-specific design considerations such as wind, snow, seismic loads, foundational engineering, and soil test reports.
Structural engineering follows NFPA 22, ASCE 7, IBC, AWWA D103, and local structural and building codes.
Prepared and stamped by a licensed structural or civil engineer. The engineer’s stamp must show he/she is licensed in the state the project is being developed within.

2. Fire Protection Design Document

Detailed drawings and specifications on all fire protection components’ size, type, arrangement, and orientation.
Appurtenances must be specified by a fire protection engineer or a professional specializing in fire protection design and included in the submission package.
The fire tank meets usable water volume requirements as defined by NFPA standards (such as NFPA 13 or 1142) or in compliance with locally adopted fire codes.
Prepared and stamped by a licensed fire protection engineer or professional specializing in fire protection tank design.

Two examples of structural calculations documents stamped by engineers are shown. Source: intellectual property of Water Storage Tanks, Inc.

Alternatively, it may be possible for one document to be submitted to the AHJ with two engineer stamps. However, this depends on the AHJ’s preference. To do this, the structural or civil engineer stamps the full submittal document for the structural design while notating an “exclusion” for the fire protection design calculations and notes. Similarly, the fire protection engineer or professional specializing in fire protection tank design would review the full submittal document separately and notate an “exclusion” for the structural design calculations and notes.

The AHJ, often a Fire Marshal, reviews this comprehensive submittal package to ensure all standards and codes are met and the fire tank design is approved. Upon review, the AHJ can accept or reject the fire tank design. Should a water storage tank supplier follow all the steps and check off all the boxes described in this article, there should be no problem with receiving approval for the fire tank’s design. However, every AHJ is different, and they have the final say. Be sure to provide all necessary and supplemental documentation to prove that your corrugated bolted steel fire protection tank meets or exceeds NFPA 22 standards.

If anything is in question, consider consulting experienced, licensed professional engineers or AHJs to ensure adherence to safety standards. For additional guidance, consider contacting trusted manufacturers like Water Storage Tanks, Inc., which has consistently demonstrated adhering to high compliance standards.

Why Choose Water Storage Tanks, Inc.?

Proven Expertise

Water Storage Tanks, Inc. has been a pioneer in the corrugated bolted steel water storage tank industry for over two decades, bringing the first corrugated bolted steel fire protection tanks to the American and Canadian markets. During that time, we received countless AHJ approvals for our fire protection tank projects, which were engineered to meet the custom needs of our customers. To this day, these fire tanks have stood and operated efficiently and will continue to do so for many decades to come.

Kai Langendoen, President of Water Storage Tanks, Inc., sits on the NFPA 22 Technical Committee and AWWA Committee 306. He has been diligently working to establish specific standards for corrugated bolted steel water storage tanks, addressing the absence of these standards. Our extensive experience and commitment to NFPA 22 compliance make us the trusted choice for fire protection tanks and set us as a benchmark for the industry.

Premium Quality

While some manufacturers may opt for cost-cutting measures, we are committed to using only the highest quality materials and strictly adhering to NFPA 22 standards. Unlike suppliers who source steel from abroad and utilize pre-cut, pre-fabricated components stored in warehouses, we take a different approach. We proudly source 100% of our materials from the United States and uniquely form, cut, and build our fire protection tanks for each individual project. No one tank is the same because no project is the same, so you can proudly say you have something truly exceptional and one-of-a-kind.

We offer one of the most extended warranties in the industry, with a 30-year manufacturer’s warranty on the tank shell and a minimum of a 10-year manufacturer’s warranty on the liner. We are confident in the quality and installation of our fire tank, but should anything occur, you can rest easy knowing you are covered. Combined with fast installation times that take days rather than weeks, your fire protection tank project can be up and running on time and on budget.

Comprehensive Support

Our team of experts provides unparalleled support throughout the ideation, planning, engineering, approval, and installation process. Have a question about water storage tanks? Just ask! Our team has more experience and knowledge on corrugated bolted steel fire protection tanks than anyone else out there. We offer a wide range of accessories, liners, roof styles, and fittings to ensure your tank meets all necessary requirements. Additionally, we maintain a network of dealers and distributors throughout the United States and Canada. No matter where your project may be, we will send a team of certified professional installers who are guaranteed to get the job done.

Ready to make the jump? Request a quote on your next fire tank project from us, and a member of our experienced Sales team will contact you.

Interested in becoming a certified CorGal® dealer? Fill out the application form, and our General Manager will contact you to discuss the opportunity further. For companies looking to become a certified build team, please call or email us, and a team member will reach out to you to discuss the opportunity.

Request a Fire Tank Quote

Conclusion

When there is no specific industry standard for corrugated bolted steel water tanks, the use of these water storage tanks for fire protection can be permitted by the AHJ when shown to be equivalent to the requirements of NFPA 22. This includes focusing on the tank’s structural integrity and ability to function as a fire protection storage vessel in emergencies. Simply adding NFPA 22 specified appurtenances does not provide equivalency. The fire tank’s design must be thoroughly reviewed and approved by an AHJ and potentially a licensed fire protection engineer.

Confirming a water tank’s equivalency is a multi-tiered process. Experienced engineers and designers must provide detailed calculations and compliance evidence with submittal packages. Due to the unique disciplines of structural engineering versus fire protection design, it is likely that two PE stamps be provided before the AHJ’s review and approval: one for structural design calculations and another for fire tank design. These two documents can then be combined for submittal. Alternatively, it may be possible for one engineer to stamp the full submittal for the fire tank design while “excluding” structural calculations, which another engineer would then review separately and similarly “exclude” the fire tank design.

Ensuring your fire protection water tanks comply with NFPA 22 standards is essential for safeguarding lives and property. By focusing on structural compliance, fire protection design, and water containment, you can ensure your fire protection tanks are reliable and ready to perform during a fire emergency. At Water Storage Tanks, Inc., we are committed to providing the highest quality fire tanks that meet and exceed NFPA 22 standards, making us the premium choice for fire protection solutions.

For more information, visit our website or contact us today to learn how we can assist with your fire protection needs.

References

American Concrete Institute. (2022). ACI 318-19(22): Building Code Requirements for Structural Concrete and Commentary (Reapproved 2022).

American Society of Civil Engineers. (2021). ASCE/SEI 7-22 Minimum Design Loads and Associated Criteria for Buildings and Other Structures.

American Water Works Association. (2021). AWWA D102-21 Coating Steel Water-Storage Tanks.

American Water Works Association. (2019). AWWA D103-19 Factory-Coated Bolted Carbon Steel Tanks for Water Storage.

American Water Works Association. (2019). AWWA D130-11 Geomembrane Materials for Potable Water Applications.

ASCE. (2024). ASCE Hazard Tool. ASCE Hazard Tool. https://ascehazardtool.org/.

FM Approvals. (2011). Approval Standard for Steel Tanks for Fire Protection.

International Code Council. (2020). 2021 International Building Code (IBC).

National Fire Protection Association. (2022). NFPA 13 Standard for the Installation of Sprinkler Systems.

National Fire Protection Association. (2022). NFPA 22 Standard for Water Tanks for Private Fire Protection.

National Fire Protection Association. (2022). NFPA 1142 Standard on Water Supplies for Suburban and Rural Fire Fighting.

Occupational Safety and Health Administration. (2016). 1910.28 – Duty to have fall protection and falling object protection. Osha.gov. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.28.

Connect With Us on Social Media

Check Out Our Latest Posts

NFPA 22 Compliance and how to limit liability
by Miles Hartman
April 16, 2026
Is It Illegal to Collect Rainwater? A Guide to the Legality of Rainwater Collection in the U.S.
by Josh Cizek
September 20, 2024
Requirements for NFPA 22 Compliance: Corrugated Bolted Steel Fire Protection Tanks
by Josh Cizek
September 5, 2024
Exploring Water’s Vital Role Beyond Drinking
by Josh Cizek
August 13, 2024

Explore Post Categories

Exploring Water’s Vital Role Beyond Drinking

Josh Cizek — Tue, 13 Aug 2024 19:49:46 +0000

Author: Josh Cizek, Marketing Specialist

Share this article

At Water Storage Tanks, Inc., we’re passionate about spreading the word about why water is so much more than just something to drink. Our Vice President, Christy Langendoen, recently shared her thoughts in a thought-provoking article titled, “Water: A Life Source, Not Only for Drinking,” featured on eOfficial.org. In this piece, Christy dives deep into the broader importance of water, emphasizing its critical role in fire protection tanks, sustainable practices, and the global need for clean drinking water.

Summary: The Multifaceted Importance of Water

Christy’s article makes it clear: while access to drinking water is absolutely essential for our survival, water’s significance goes far beyond just quenching our thirst. She explores how water is a cornerstone for various industries, from agriculture to the functionality of fire protection tanks, which are vital for safety during emergencies. Christy also touches on the role water plays in industrial processes and its crucial part in maintaining healthy ecosystems.

In her article, Christy doesn’t shy away from addressing the pressing issue of water scarcity. She highlights the urgent need for sustainable water management practices and shines a light on organizations like ARCSA (American Rainwater Catchment Systems Association), which promote effective water conservation strategies. These strategies are essential not only for ensuring a steady supply of clean drinking water, but also for keeping agricultural systems thriving and fire protection tanks ready to safeguard our communities.

She also dives into the link between water management and global food security. Efficient water use in agriculture is key to meeting the world’s growing food demands. Additionally, Christy discusses how climate change is impacting our water resources and stresses the need to preserve water systems to support biodiversity and reduce environmental risks.

Christy Langendoen, Vice President of Water Storage Tanks, Inc.

Understanding Water’s Diverse Roles

Christy Langendoen, our Vice President at Water Storage Tanks, Inc., is a leading expert in water management and sustainability. Her article reflects her deep understanding of water’s critical roles—not only as a source of drinking water but also as a key component in sectors like fire protection tanks and agriculture. Christy’s passion for promoting sustainable water practices comes through in her writing, where she advocates for a holistic approach to water management that takes into account both human and environmental needs.

We highly recommend reading Christy’s full article on eOfficial.org to get a deeper understanding of the many roles water plays in our lives. Whether you’re involved in maintaining fire protection tanks, planning sustainable agriculture, or simply concerned about the future of drinking water, Christy’s insights are invaluable for anyone looking to make informed decisions about water use and conservation.

To read the full article, click here.

Stay informed, and join the conversation on how we can better manage and protect our water resources. Understanding the importance of water—whether it’s for drinking, sustaining fire protection tanks, or supporting sustainable practices—is essential for ensuring a secure and healthy future for all. By backing organizations like ARCSA and adopting responsible water management strategies, we can all make a meaningful impact on global water conservation efforts.

If you’re looking for ways to store your water safely and sustainably, check out our website. We offer a range of water storage solutions tailored to various applications, including fire protection, irrigation, potable water, and more. Ready to start your next project? Get a free consultation from our team of experts today!

Get a FREE Consultation on Your Next Water Storage Project

Connect With Us on Social Media

Check Out Our Latest Posts

NFPA 22 Compliance and how to limit liability
by Miles Hartman
April 16, 2026
Is It Illegal to Collect Rainwater? A Guide to the Legality of Rainwater Collection in the U.S.
by Josh Cizek
September 20, 2024
Requirements for NFPA 22 Compliance: Corrugated Bolted Steel Fire Protection Tanks
by Josh Cizek
September 5, 2024
Exploring Water’s Vital Role Beyond Drinking
by Josh Cizek
August 13, 2024

Explore Post Categories